Saginaw Push Button Enclosure, Stainless Steel, 1 Position, 30.5mm

Saginaw Control & Engineering SCE-1PBSS is a 1 position push button enclosure. It is made from 0.063 304 stainless steel with a #4 brushed finish and

Hoffman Stainless Steel Enclosures

Saginaw Enclosures, SCE-4SPBXI, PBXI Enclosure

Saginaw SCE-4SPBH Hinged Push Button Box, 4 Position, 30.5mm

Electrical Push Buttons - Pushbutton Stations

Saginaw SCE-4PBSSI Push Button Enclosure, 4 Position, 22.5mm

Steel Pushbutton Enclosures – NEMA Type 12 & NEMA Type 4, 1 to 36, 30.5 mm or 22.5 mm Holes

Hammond 1554PB1A

The Saginaw SCE-16PBH is a 16 hole hinged cover push button enclosure designed to be used with 30.5mm push buttons, switches and pilot devices. This 16 hole hinged cover push button enclosure is manufactured with a heavy duty .063 carbon steel and is gray powder coated inside and outside for increased durability and protection. The 30.5mm hole in this hinged cover push button enclosure has 4 keyways so that it can be used with any brand of switch or 30.5mm device.

SCE-16PBH – Saginaw – Hinged – PB – Enclosure

The Saginaw SCE-4SPBSSI is a 4 hole NEMA 4X push button enclosure designed to be used with 22.5mm push buttons, switches and pilot devices. This 4 hole push button enclosure is manufactured with a heavy duty .063 stainless steel, type 304, and is #4 brush finished on all exterior surfaces. The 22.5mm hole in this stainless steel push button enclosure has 4 keyways so that it can be used with any brand of switch or 22.5mm device.