DC Hardwire LED Driver, 30 watts, 12V

Same Day Shipping Available | DC Hardwire LED Driver, 30 watts. 12V | Call 866-758-5836!
Used with our Low Votlage LED Lightstar String Lights, this driver series features universal 100-240V AC power input with exceptional reliability and class II rating. Standard built-in protections include short circuit, over-voltage, and overload protections. See complete features and specifications below. 30-Watt Driver Features: Class 2, 30W constant voltage driver Class 2 double insulation barrier for surge protection (no ground connection) Short circuit, over-current, over-voltage, and over temperature protection Io and Vo adjustable through built-in potentiometers Compact housing features integrated wire cover strain reliefs Universal AC input (100-240V) with built-in constant current limiting circuit cURus Recognized (indoor use) RoHs Compliant For mounting, set upon a flat surface or house in an enclosure 30-watt Specification Sheet 60-Watt Driver Features: Class 2, 60W constant voltage driver Class 2 double insulation barrier for surge protection (no ground connection) Short circuit, over-current, over-voltage, and over temperature protection Universal AC input (full range) with built-in constant current limiting circuit Fully isolated plastic case; encapsulated with IP67 level ingress protection Compatible with ENCL-11 power supply enclosure cURus Recognized (dry and damp locations) RoHs Compliant For mounting, set upon a flat surface or house in an enclosure 60-watt Specification Sheet 100-Watt Driver Features: 100W constant voltage driver Short circuit, over-current, over-voltage, and over temperature protection Universal AC input (full range) with built-in constant current limiting circuit Fully isolated plastic case; encapsulated with IP67 level ingress protection cURus Recognized (dry and damp locations) RoHs Compliant For mounting, set upon a flat surface or house in an enclosure 100-watt Specification Sheet 150-Watt Driver Features: 150W 24V constant voltage and constant current driver Class 1 metal housing (Type HL) Short circuit, over-current, over-voltage, and over temperature protection Io and Vo adjustable through built-in potentiometers cURus Recognized Suitable for wet or dry locations; IP65 RoHs Compliant For mounting, set upon a flat surface or house in an enclosure 150-watt Specification Sheet

Suited for both dry and wet location. Hardwire installation only. Automatic shut-off in case of lightning overload open or short circuit over-temperature or other fault. Use minimum 18 AWG rated cable or better to tie in with line voltage.

Armacost Lighting 811004 100 Watt Standard Indoor/Outdoor Power Supply Gray

Standard LED Power Supply, 24W, 12V Constant Voltage, White

BuckTitan DC High-Output Constant Current LED Driver

ESHINE hardwire 12-Volt DC Kit LED power supply drive is a reliable power source for LED strips and any other devices with power less than 30-Watt and running voltage at 12-Volt (DC). It is compatible with our 12-Volt ESHINE lighting. IMPORTANT: Will NOT work with our 24-Volt Lighting.

Eshine EAPT1230W-D Dimmable 12V DC 30 Watt 2.5A Power Supply Transformer for LED Lighting - Hardwire Kit

American Lighting ADPTPRO-DRJ-96-24 - 96 Watts 24V DC LED Driver - Bees Lighting

Used with our Low Votlage LED Lightstar String Lights, this driver series features universal 100-240V AC power input with exceptional reliability and

DC Hardwire LED Driver, 12V (30W-150W)

1330mA CC Dimmable 38-Watt MagTech LED Driver

TLX 40 Watt Puck AC/Triac Dimmable 12V Hardwire Power Supply - Lumicrest LED Lighting

Armacost Lighting 24-watt dimmable LED driver provides outstanding LED dimming performance and architectural-quality brightness control. Although virtually all dimmers will work with this dimmable LED driver Armacost Lighting recommends Lutron CFL and Leviton illumatech universal dimmers because of their low end dimming range adjustment. Delivers smooth stable flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance.

Armacost Lighting 860240 24 Volt Universal LED Dimmable Driver 24 Watt White

The Contractor grade Transformer is used for either indoor or outdoor applications. This transformer is for those larger projects or substantial wire runs requiring more power but is housed in a very small package. Install the transformer outside with confidence as the unit is waterproof and impervious to the elements.